Level & Quality Sensors

This will close in 0 seconds

Click on the logos to explore company sites.

● Temperature Sensors

High accuracy
High stability
Proven reliability
Fast response time
Deep domain expertise
Duplicate manufacturing locations

● Pressure Sensors

High accuracy
Long-term stability
Custom options
Fast response time
Diagnostic and protective features (ASIL)

● CO₂ Gas Sensors

Self-calibration
Low power consumption
Compact design
LIN Bus communication
Custom packaging options

● Position Sensors

Robust and reliable modular design
Selectable working principle: Potentiometric, hall effect, reed switch

● Level & Concentration Sensors

High Accuracy
Continuous monitoring for fluid contamination
Programmable for irregular shape tanks
Customizable Options

● Accelerometers

Wide frequency ranges available
Single and triaxial configurations
Robust design for demanding environments
Various mounting methods
Electrically isolated
High sensitivity and low noise

● Position Level Sensors

Absolute non contact measurement
Highest reliability
Robust and compact design for harsh environments

This will close in 0 seconds

Click on the logos to explore company sites.

● Temperature Sensors

High accuracy
High stability
Noise immune NTC option
Fast response time
Moisture resistant

● Pressure Sensors

High accuracy
Leakproof
Harsh media compatibility

● Gas Detection Sensors

PWM and LIN bus
Custom packaging options
Detectable gases: CO₂, CO, NO₂, NH₃

● Position Sensors

Long life
Low hysteresis
Excellent resolution and linearity
Field-proven
Custom connectors and wires

● Dust Particulate Sensors

PM2.5
Laser detection
Fast response
High accuracy

● Combined Pressure & Temperature Sensors

Leakproof
High accuracy
Wide pressure range: 10bar to 200bar
Diagnostic and protective features (ASIL)

This will close in 0 seconds

● Temperature Sensors

Prevents ice formation on vanes during flight.

Self-regulating properties – power will adjust to prevailing conditions with ~10x variation in output
High reliability with wire-wound products
Special shapes suit customer design

● Temperature Sensors

Precision temperature measurement of in-flight instrumentation and climate control.

High reliability
Excellent long-term stability
Multiple rugged configurations available

● Pressure Sensors

Used in instrumentation for airspeed indication and during flight test for aerodynamic measurements.

Low long-term drift
High stability and repeatability

● Ultra Low Pressure Sensors

Used in instrumentation for barometric pressure/weather monitoring.

Calibrated to –40^°C to 125^°C
High stability and repeatability
Digital output: 14bit or 18bit

● Tilt Sensors

Used in instrumentation for barometric pressure/weather monitoring.

Analog and CAN output
Dual axis combined gyroscope and accelerometer
Fully sealed (IP69K) for use in harsh environments
Operating temperature from -40^°C to +85^°C

This will close in 0 seconds

● Speed & Position Sensors

Monitors wheel speed, engine speed and position of the engine.

Variable reluctance and active hall effect or magneto resistive sensors
Zero speed, large air gap capability
Packaged to resist harsh environments
Customizable options

● Ultrasonic Fluid Level Sensors

Continuously monitors liquid levels within tank or reservoir, including fuel, coolant and hydraulic fluids.

High accuracy
Robust, non-contact sensing
Slosh filtering

Customizable options

● Vibration Sensors

Continuously monitoring engine balance.

Early fault detection
Compact sensor placement
High sensitivity and extremely low noise
Suitable for temperatures from -400^° F to +1400^°F

● Pressure Sensors

Combustion instability measurement.

Fast repsonse time
High accuracy
Long-term stability and repeatability
Suitable for temperatures from -400^° F to +1400^°F

● Current Sensors

Based on open-loop Hall-effect and coreless TMR technology.

Busbar, integrated busbar, flanged and wire mounting
Simple or redundant analog ratiometric output
Measured values of up to ±4,000A

This will close in 0 seconds

● Temperature Sensors

Measure and monitor fluid temperature of inlet/outlet battery coolant to provide indication of battery cell temperature.

No leak path – Sensor cavity and tube are one piece
USCAR sealed connection system
Various part geometries available

● Coolant Breach / Water Intrusion Sensors

Detect the presence of coolant / water in the battery pack.

Operates based on conductivity of the fluid being sensed
Easy to install
RoHS compliant

● Pressure Sensors

Measure the pressure in the cooling system to control pump capacity.

Internal metal sealing for high media compatibility and no leakage
Customized calibration for high accuracy

● Combined Pressure & Temperature Sensors

Measure pressure in the cooling system, while, at the same time, measure temperature of the coolant for optimum thermal management.

Available versions: R1234yf (up to 35bar) and R744 (up to 200bar)
Tested LIN 2.1 conformity
Automatic address assignment within LIN network

● Ultrasonic Level, Conductivity, Concentration, and Temperature Sensors

Continuously monitor fluid level for early detection of coolant leakage.

Level accuracy: ±2mm
Temperature accuracy: ±2.5^°C
Output protocol offerings: Analog, PWM, SENT, CAN, LIN
Input voltage options: 5V / 12V / 48V

This will close in 0 seconds

Click on the logos to explore company sites.

● Temperature Sensors

High accuracy
High stability
Noise immune NTC option
Moisture resistant
Fast response time

● Position Sensors

Robust and reliable modular design
Custom form-factor available
Selectable working principle: Potentiometric, hall effect, reed switch

● Pressure Sensors

Leakproof
High accuracy
Media compatibility

● Gas Detection Sensors

Detectable gases: CO₂, CO, NO₂, NH₃
PWM and LIN bus
Custom packaging options

● Dust Particulate Sensors

PM2.5
Laser detection
Custom packaging options

● Combined Pressure & Temperature Sensors

Leakproof
High accuracy
Diagnostic and protective features (ASIL)
Wide pressure range: 10bar to 200bar

This will close in 0 seconds

● Temperature Sensors

High accuracy
High stability
Customized to application
Utilizes metallurgical bond glass-coated NTC

● Pressure Sensors

Stable and accurate
Durable
Customizable design
Multiple output options

● Position Sensors

Non-contact inductive and hall-effect technologies
Excellent resolution and precision
Reliable in harsh environments
Touch-less mechanical solutions

● Position Sensors

Absolute, non-contact measurement
Highest reliability
Robust and compact design for harsh environments

● Combined Pressure & Temperature Sensors

High accuracy
Oil resistant
Wide temperature range: -40^°C to 150^°C
Robust against pressure spikes

● Accelerometers

Wide frequency ranges available
Single and triaxial configurations
Robust design for demanding environments
Various mounting methods
Electrically isolated
High sensitivity and low noise

● Gas Detection Sensors

Detect the presence of combustible gases that indicate batteries Thermal Runaway conditions.

Detectable gases: H₂O, CO₂, CO, NH₃
Temperature / Humidity sensor
Pressure sensor (20 up to 250 kPa)
Fast response time: less than 1 second
IP6K7 rating

This will close in 0 seconds

● Temperature Sensors

Robust design for harsh environments
Thermal cut-off fuses for added safety
Customizations available

● Gas Sensors (CO₂)

OEM and sensors and transmitters
NDIR dual and single channel technology
Connectivity to Building Automation Systems

● Gas Sensors (VOC, Flammable and Toxic)

Detectable gases: VOC, NO, NO₂, NH₃, H₂S
1000 ppb to 1000 ppm

● Humidity Sensors

Duct and wall-mounted transmitters
Fully-calibrated OEM sensors
Connectivity to building automation systems

● Pressure Sensors

High stability, accuracy and over-pressure
Low drift

● Ultra Low Pressure Sensors

High sensitivity, stability and repeatability
Compact package size
Analog and digital output

This will close in 0 seconds

● Position Sensors

Non-contact inductive and hall-effect technologies
Long life
Suitable for harsh environments
Excellent resolution and precision
Modular, compact and lightweight design
Custom linear and rotary position feedback

● Speed Sensors

Low hysteresis
Long life
Field-proven
Custom connectors and wires

● Vibration Sensors

Monitor equipment to ensure efficient operation
Early fault detection
Compact sensor placement
Real-time data feedback of live conditions
Meets environmental and hazardous area requirements
Various process signals for control-system inputs

● Position Linear Sensors and Level Transmitters

Absolute, non-contact measurement
Highest reliability
Robust design for harsh environments
ATEX certified

● Ultra Low Pressure Sensors

Measure, monitor, and control air flow and air pressure
High stability and repeatability
Compact package size
High accuracy

● Ultrasonic Air Transducers

Non-contact sensing
Multiuse: liquid or solid level, flow control, proximity sensing
Rugged IP68

This will close in 0 seconds

Click on the logos to explore company sites.

● Temperature Sensors

Highly accurate
Proven reliability
Fast response time
Continuous monitoring
Small profile for tight spaces
Customization options

● Pressure Sensors

Extremely small size
Stable and accurate
Media compatibility
Customizable designs
Die, wire assembly and eval-kits available

● Ultra Low Pressure Sensors

High accuracy and repeatability
Fast response
Customized options available
Sized for portable or handheld equipment

● Position Sensors

Low profile
Long life
Excellent resolution
Excellent linearity
Custom connectors and wires

● Ultrasonic Sensors

Custom solutions
Piezoceramic capability
High reliability
Integration capability for occlusion and flow

● Position and Level Sensors

Absolute, non-contact measurement
Highest reliability
Compact design

This will close in 0 seconds

● Pressure Sensors

Applications: Engine fuel and air filter, transmission fluid, air blast measurement, underwater blast pressure measurement

High accuracy
Harsh media compatibility

● Gas Detection Sensors

Application: Fuel leakage

0 to 100% LEL
Approved EX-d
Mechanically robust

Application: detection of toxic gases

Detectable gases: VOCs, CO₂, NO₂, NH₃
Custom and robust packaging options

● Position Sensors

Application: Multi-turn steering wheel angle

Patented through-hole solution
Long life for harsh environments

● Ultrasonic Level & Concentration Sensors

Applications: Fuel, coolant, hydraulic fluid, DEF SCR systems

Continuous monitoring
High accuracy
Robust, non-contact sensing

Applications: Wheel speed, engine speed and position

Variable reluctance, active hall effect or magneto resistive sensors
Zero speed, large air gap capability

● Vibration Sensors

Application: Health and Usage Monitoring Systems (HUMS)

Rugged
Reliable
Durable
Condition-based maintenance of vibrating / rotating parts
Vehicle dynamics
NVH
Shock measurement due to blast

● Position Sensors

Application: Door control, armoured hatch control, suspension control, protective shield control, outrigger control, steering control

Rugged design
Reliable position feedback

● WeatherStations^®

Application: Mobile and stationary platforms (custom colors available)

Hyper-local weather
True wind speed and direction
GPS, heading, air temp, barometric pressure and relative humidity
Rugged, compact, maintenance-free weather sensors (IPX7)

This will close in 0 seconds

Click on the logos to explore company sites.

● Gas Detection Sensors

Application: Fuel leakage

0 to 100% LEL
Approved EX-d
Mechanically robust

Application: detection of toxic gases

Detectable gases: VOCs, CO₂, CO, NO₂, NH₃
Custom and robust packaging options

● Ultra Low Pressure Sensors

Applications: Test/simulation, unmanned aerial vehicles (UAV)

High accuracy
High repeatability
Total error band
Compact size

Applications: General military grade and barometric pressure

Calibrated -40^°C to +125^°C
High stability and repeatability
Digital and amplified outputs

● Vibration Sensors

Application: Health and Usage Monitoring Systems (HUMS)

Rugged
Reliable
Durable
Condition-based maintenance of vibrating / rotating parts

● Ultrasonic Level & Concentration Sensors

Applications: Fuel, coolant, hydraulic fluid, DEF SCR systems

Continuous monitoring
High accuracy
Robust, non-contact sensing

Applications: Helicopter landing gear and fuel systems

Absolute, gauge and sealed gauge
From 3 psi to 7500 psi
High accuracy

● VC Flight Test Accelerometers

Applications: Flutter testing, vibration and g loading during maneuvers

From 2 g’s to 200 g’s

● 6DoF Accelerometers and Rate Measurement

Applications: Aircraft, helicopter, and missile flight testing

Acceleration from 2 g’s to 500 g’s
Angular range from 100 to 18,000 degrees per second

● Position Sensors

Application: automated positioning

Rugged design
Reliable position feedback

This will close in 0 seconds

● Vibration Sensors

Applications: Underwater acoustics, ordinance monitoring

Ultra low-noise internal amplifier
Encapsulated in polyurethane

Application: Underwater vibration monitoring

High pressure rating
High sensitivity
Wide frequency range
Ground isolated to eliminate ground loops

Applications: Towed arrays, sonobuoys, deep ocean

Incorporates low-noise preamplifier with calibration circuit
Electrostatically shielded and molded in polyurethane

Applications: Underwater unmanned vehicles (UUV), towed arrays, ACOMM

4-channel combination: Orthogonal axis accelerometers and omnidirectional hydrophone
Improved signal-to-noise ratio

● Pressure Sensors

Applications: Measurement of dynamic pressure due to turbulent water flow or cavitation

Integral waterproof cable hydro-tested during production
Acceleration compensated
Integral waterproof cable hydro-tested during production
Ground isolated

● Position Sensors

Application: rudder control, launch tube control, anchor control, periscope control

Rugged design
Reliable position feedback

● Gas Detection Sensors

Application: Fuel leakage

0 to 100% LEL
Approved EX-d
Mechanically robust

Application: detection of toxic gases

Detectable gases: VOCs, CO₂, NO₂, NH₃
Custom and robust packaging options

● WeatherStations^®

Application: Mobile and stationary platforms (custom colors available)

Hyper-local weather
True wind speed and direction
GPS, heading, air temp, barometric pressure and relative humidity
Rugged, compact, maintenance-free weather sensors (IPX7)

● Custom Transducers and Arrays

Application: Mine Detection, Harbor Security, Acoustic Communications

Proven defense contract history
Custom designed transducers to fit any application
High bandwidth complex arrays

This will close in 0 seconds

Click on the logos to explore company sites.

● Triaxial Accelerometers

These accelerometers are used for ground testing and flight testing to measure vibration in 3 axes.

Industry standard ICP^® (IEPE) power supply
Measurement of x, y, z vibration in one sensor
Adhesive mount for testing applications
Screw mount for monitoring applications

● Piezoresistive Pressure Sensors

PCB's Endevco brand of piezoresistive pressure sensors are suitable for wind tunnel and flight testing.

Aerodynamic measurements
High intensity sound from engines or motors
Fast response time
Measure both static and dynamic pressure

● Microphones

Acoustic measurement of cabin noise for passenger comfort.

Prepolarized with industry standard ICP^® (IEPE) power supply
Measurement ranges from 5dB to 178dB
Frequencies from 4Hz to 70 kHz

● Blast Pressure Sensors

Battery explosion testing for electric aircraft.

Pressure sensors with quartz sensing elements
For shock wave, blast, and explosive or detonation in closed chambers
High frequency response

● Variable Capacitance Low-Frequency Accelerometers

For flutter testing of wing tips during flight.

Can be powered by direct aircraft DC voltage (no signal conditioner required)
Gas-damped, silicon MEMS sensing elements offer high frequency overload protection
Screw mount for permanent monitoring applications

This will close in 0 seconds

● Single Axis Accelerometers

These accelerometers are used for Health and Usage Monitoring Systems (HUMS) to monitor vibration over the lifetime of the aircraft.

Industry standard ICP^® (IEPE) power supply
Screw mount for monitoring applications
Electrically case isolated for high EMI environments
Integral cable to reduce weight

● Digital Barometric Pressure Sensor & Air Speed

AUAV Family - Dual pressure sensor combines both Barometric (Altitude) and Air Speed Sensing in a single PCB mountable package.

Wide array of PCB mountable Pressure Sensors for Digital or Analog interface
Available I2C or SPI Digital, Amplified Analog, or Basic mV outputs
Configurable to meet specific design requirements
Widely used in both commercial and military UAV applications

● Altitude

Family of pressure sensors for customized analog or digital high-performance measurement.

● Wind

Family of pressure sensors used to detect head wind, cross axis wind for flight stability control.

PCB mount package configurations
Analog, Digital I²C or SPI interface options
Digital Sensors available with unique addressing for diagnostic use
Available in Industrial Grade for rugged environments
Available with Parylene protective coating

● Barometric Pressure Sensor

Packaged in a QFN configuration, the NPB packaging contains the pressure sensing element and all necessary signal conditioning electronics. AEC-Q 100 Qualified with I2C and SPI interface.

Pressure Ranges: 260 to 1260mBar, 50 to 200kPa
4x4mm QFN Package
QFN package allows AVI to detect the solder joint
Ultra low current consumption in sleep mode
1²C interface (SPI available upon request)
Operating range 1.7V to 3.6V

● Media Isolated Pressure Sensor

These sensors utilize stainless-steel media isolated technology, as well as backside absolute pressure technology to provide accurate and reliable measurements in harsh environments. The piezoresistive sensor chip is housed in a fluid-filled cylindrical cavity and isolated from measured media by a stainless-steel diaphragm and body.

Range from 0 to 15,000 PSI
Absolute, differential, and gauge
Analog and digital output
Available in ported and non-ported versions
Waterproof options

● Current Sensor

Current sensors generate a ratiometric analog output voltage signal proportional to the current flowing through the conductor and provide accurate measurement of AC and DC currents in battery management and motor control applications.

Based on Hall effect or TMR technology
Busbar or cable mounting
Measured current value from ±25A to +4000A
Non-intrusive technology
Galvanic separation between power and control
Operating temperature from -40^°C to +125^°C

● Tilt Sensor

The tilt sensors measure inclination, tilt and angle in harsh environmental conditions. With its ability to measure angles up to 360^° with an accuracy of less than 0.5° over the full temperature range, it is perfect for providing flight control systems with data to maintain stability in horizontal flight.

Reliable and wear-free MEMS technology
Inclination range: ±25^°, ±45^°,+90^°,±180^°, and others tilt and acceleration ranges upon request
Digital signal processing, filter algorithms
Analog and CAN output
Dual axis combined gyroscope and accelerometer
Accuracy less than 0.5^° (-40^°C to 85^°C)
Fully sealed (IP69K) for use in harsh environments
Operating temperature from -40^°C to +85^°C

● eMotor Position Sensor

Accurate feedback on the angular position, direction, and speed of the rotor shaft to optimize control of the motor inverter and drive the electric engines with the best possible efficiency.

Alternative to conventional resolvers
Rotor position sensor for high-speed motor commutation
High accuracy
Up to 600.000 rpm (if only 1PP)
Low power consumption
Possibility to have an ASIL qualified sensor (D)
Cost efficient and lightweight by design
No need of magnetic target
Stray field immune
Robustness to misalignments and environmental conditions (IP, vibration, dust, high temperature)
Flexible design (end of shaft, through shaft and arc)

● Resistive Angle Sensor

The N-15 series offers you endless rotation, 340^° wide electrical angle, SMD or through-hole mount, an extended working temperature range of -40^°C to +120^°C and a whole series of customization possibilities making it the most flexible resistive sensor on the market. The N-15 is ideal for drone camera gimball angle position feedback

Long life
Excellent performance (3% linearity)
Up to 2.000.000 life cycles
IP54 protection
360^° endless rotation
Low profile (4.4 mm) and footprint (15 mm)
High operating temperature range

● Thermal Runaway Sensor

Measurement of hydrogen gases released from lithium-ion battery packs. Hydrogen gases leaking from battery packs indicate battery failure.

Two options:
- Surface mount sensor for mounting on the battery management module or independent device with BUS communications
- Factory calibrated with automatic temperature compensation

● Hydrogen Gas Detection Sensors

To detect H₂ leakages in fuel-cell operating drones or to detect off-gassing of H₂ during Li-ion batteries Thermal Runaway event.

Compact H₂ sensors with different output signals
Small size

● Air Quality Gas Detection

Detection of various Toxic gases in air. H₂, CO, HF, NO₂, VOC, 0₃, SO₂.

Broad range of different gas sensors
Small size
Very low power consumption
Low weight

Temperature

● Type FL Sensor

Flexible temperature sensor for battery cell temperature measurement or other temperature measurement where a thin flexible sensor is needed

● Ring / Tab Terminal Sensor

Measures the surface temperature of what it is affixed to

● Motor Winding Temperature Sensor

Measures the motor windings of the motor to ensure an over temperature condition is not reached

● PTC Heaters

Prevents the lens of cameras from fogging over

● Interchangeable NTC Thermistors

Temperature measurement NTC theristor with high accuracy

This will close in 0 seconds

Click on the logos to explore company sites.

● Infrared Sensors

Measures an object's temperature contactlessly.

● Barometric Pressure Sensors for Environmental Monitoring

Barometric sensors provide valuable data for altitude correction and atmospheric conditions. Monitoring and Detection of surrounding weather conditions can be an early warning system for remote users where predictive monitoring is crucial.

Available in standard 15 PSIA ranges or customize for specific range use
Intended for PCB mounting
Available in a wide variety of packages and pressure port styles to fit a UAV’s architecture
Available in fully calibrated Digital 1²C, SPI Interface, Amplified or Basic mV output version
Digital Sensors available with unique addressing for redundant back up sensors or diagnostic use

● Humidity & Temperature

Fully-calibrated and temperature-compensated combined humidity and temperature sensor supplied in a water-resistant IP67 package, making it the most advanced and cost-effective sensing solution for virtually any type of harsh environment application.

Ready to use - Fully-calibrated and temperature-compensated
Water resistant - IP67 Certified
Digital Output or Pulse Density Modulated (PDM) Output converted to Analog
Available in multiple flexible cable lengths
Precise and accurate (±2% RH, ±0.5^°C, 14 bit resolution)
Low current consumption
Reliable in harsh environments
Flexible mounting options

● Air Quality Gas Detection

Detection of various toxic gases in th air. H₂, CO, HF, NO₂, VOC, O₃, SO₂.

Broad range of different gas sensors, small size, very low power consumption, and low weight

This will close in 0 seconds

● Temperature Sensors

Monitor temperature in various areas of a fuel cell vehicle
Moisture proof construction
Fast Response time
Wide temperature range
High-pressure proof design available

● Gas Leak Detection Sensors

Sensitivity to H₂ gases
Packaged Modules and Surface Mount versions
Fast response time: less than 1 second
IP6K7 rating. ASIL-A sensors, Thermal Conductivity sensor technology, 0-4% range

● Ultrasonic Fluid Level Switch

Simple analog (voltage) output
Extremely durable and accurate
Microprocessor controlled
All-plastic design (PPS) eliminates opportunity for metal ionization

● Pressure Sensors

MEMS, piezoresistive, oil-filled
Extremely durable and accurate
Configurable with multiple outputs, connectors, ports, etc.
High accuracy and performance
Wide pressure range
Customization for specific applications
ASIL rating possible

● Pressure & Temperature

All plastic housings, bolt on designs
Willing to customize for specific applications
High accuracy and performance
Wide pressure range
Custom options

● Gas Sensor

Hydrogen Sensor
Surface mount
Analog Output
Pre-calibrated
Automotive qualified
-0-160000 ppm range

This will close in 0 seconds

● Piezoelectric Accelerometers

These accelerometers are used for ground testing and flight testing to measure vibration in 3 axes.

Industry standard ICP® (IEPE) power supply
Measurement of x, y, z vibration in one sensor
Adhesive mount for testing applications
Screw mount for monitoring applications

● Piezoresistive Pressure Sensors

PCB's Endevco brand piezoresistive pressure sensors are used for airflow measurements common in wind tunnel and flight testing.

Aerodynamic measurements for scaled model or flight vehicle surfaces
High-intensity sound from engines or motors
Probe-type and surface-mount sensor packages available
Fast response time, high output, excellent signal-to-noise ratio
Measure both static and dynamic pressure

● Microphones

Acoustic measurements to investigate rotor noise mechanisms, sound transmissibility, and cabin noise for passenger comfort.

Prepolarized with industry standard ICP® (IEPE) power supply
Measurement ranges from 5 dB to 178 dB
Frequencies from 4 Hz to 70 kHz

● Variable Capacitance Low-frequency Accelerometers

For flutter testing of wing tips during flight-testing phase.

Can be powered by direct aircraft DC voltage (no signal conditioner required)
Gas-damped, silicon MEMS sensing elements offer high-frequency overload protection
Screw mount for permanent monitoring applications

● Piezoresistive Safety Accelerometers

Drop and crash testing sensors for testing fuselage survivability, crush zones, and passenger safety with ATDs

Compliant to International Standards like SAEJ211, J2570, ISO 6487
Piezoresistive design allows DC response
Small and lightweight - single and triaxial packages
Gas Damped, rugged to 10,000g

This will close in 0 seconds

● Accelerometers

These accelerometers are integrated into the aircraft's Health and Usage Monitoring System (HUMS) to continuously monitor vibration of critical drivetrain components over the lifetime of the aircraft.

Early fault detection
Industry standard ICP® (IEPE) power supply
Screw mount for monitoring applications
Electrically case isolated for high EMI environments
Integral cable to reduce weight
Suitable for temperatures from (See 339 series)

● Media Isolated Pressure Sensor

These sensors utilize stainless-steel media isolated technology, as well as backside absolute pressure technology to provide accurate and reliable measurements in harsh environments. The piezoresistive sensor chip is housed in a fluid-filled cylindrical cavity and isolated from measured media by a stainless-steel diaphragm and body.

Range from 0 to 15,000 PSI
Absolute, differential, and gauge
Analog and digital output
Available in ported and non-ported versions
Waterproof options

● Current Sensor

Current sensors generate a ratiometric analog output voltage signal proportional to the current flowing through the conductor and provide accurate measurement of AC and DC currents in battery management and motor control applications.

Based on Hall effect or TMR technology
Busbar or cable mounting
Measured current value from ±25A to ±4000A
Non-intrusive technology
Galvanic separation between power and control
Operating temperature from -40°C to +125°C

● eMotor Position Sensor

Accurate feedback on the angular position, direction, and speed of the rotor shaft to optimize control of the motor inverter and drive the electric engines with the best possible efficiency.

Alternative to conventional resolvers
Rotor position sensor for high-speed motor commutation
High accuracy
Up to 600.000 rpm (if only 1PP)
Low power consumption
Possibility of having an ASIL-qualified sensor (D)
Cost-efficient and lightweight by design
No need of magnetic target
Stray field immune
Robustness to misalignments and environmental conditions (IP, vibration, dust, high temperature)
Flexible design (end of shaft, through shaft and arc)

● Temperature Sensors

NTC thermistor that measures the temperature of the copper windings.

High accuracy
Long-term stability
Rugged design for maximum protection

● Air Quality Gas Detection

Detection of various Toxic gases in air. H₂, CO, HF, NO₂, VOC, O₃, SO₂.

Broad range of different gas sensors, small size, very low power consumption and low weight

This will close in 0 seconds

● Temperature Sensors

Provides in-flight temperature control for cabin comfort and service items.

High accuracy
High stability
Noise-immune NTC option
Moisture resistant
Fast response time

● Position Sensors

Long life
Low hysteresis
Excellent resolution and linearity
Field-proven
Custom connectors and wires

● Pressure Sensors

Leakproof
High accuracy
Harsh Media compatibility

● Gas Detection Sensors

Detectable gases: CO₂, CO, NO₂, NH₃
PWM and LIN bus
Custom packaging options

● Dust Particulate Sensors

PM2.5
Laser detection
Fast response
High accuracy

● Pressure Sensors

Designed for conventional Air-conditioning Systems. Different output signals available.

Leakproof
High accuracy
Harsh Media compatibility

● Combined Pressure & Temperature Sensors

Versions for R1234yf and also for CO₂ Heat Pump Systems with R744.

Leakproof
High accuracy for optimum system efficiency
Wide pressure range: 10 bar to 200 bar
LIN output
Diagnostic and protective features

This will close in 0 seconds

● Temperature Sensors

Measure and monitor surface temperature of the many cells within the battery pack, which is critical to preserving the chemistry of the battery.

Single point temperature sensors
Rigid and flexible types
Custom sensor packaging

● Cell Connection System (CCS)

Monitors the battery cover for temperature at key points.

High current circuit for battery cell connectivity
Available styles: Wire Harness and Flexible Printed Circuit (FPC)

● Water Detection Sensors

Detects moisture leakage and feeds a signal to the Battery Management System.

510k ±3%
Operating temperature range: -40°C to +85°C
RoHS Compliance (Directive 2011/65/EU)

● Current Sensor

Current sensors generate a ratiometric analog output voltage signal proportional to the current flowing through the conductor and provide accurate measurement of AC and DC currents in battery management and motor control applications.

Based on Hall effect or TMR technology
Busbar or cable mounting
Measured current value from ±25A to ±4000A
Non-intrusive technology
Galvanic separation between power and control
Operating temperature from -40°C to +125°C

● Hydrogen Gas Detection Sensors

Measurement of hydrogen gases released from lithium-ion battery packs. Hydrogen gases leaking from battery packs indicate battery failure.

Two options:
- Surface mount sensor for mounting on the battery management module or independent device with BUS communications
- Factory calibrated with automatic temperature compensation

● Hydrogen Gas Detection Sensors

To detect off-gassing of H₂ during Li-ion batteries Thermal Runaway event or to detect H₂ leakages in fuel-cell operating eVTOL

Compact H₂ sensors with different output signals
Small size

● Blast Pressure Sensors

The sensors are used in pre-flight battery testing; to capture battery explosion during drop and thermal run away.

Pressure sensors with quartz sensing elements
For shock wave, blast, and explosive or detonation in closed chambers
High-frequency response

This will close in 0 seconds

● Temperature Sensors

Outlet battery coolant to provide indication of battery cell temperature.

No leak path - Sensor cavity and tube are one piece
USCAR sealed connection system
Various part geometries available

● Coolant Breach / Water Intrusion Sensors

Detect the presence of coolant / water in the battery pack.

Operates based on conductivity of the fluid being sensed
Easy to install
RoHS compliant

● Pressure Sensors

Measure the pressure in the cooling system to control pump capacity.

Internal metal sealing for media compatibility and no leakage
Customized calibration for high accuracy

● Combined Pressure & Temperature Sensors

Measure pressure in the cooling system, while, at the same time, measure temperature of the coolant for optimum thermal management.

Available versions: R1234yf (up to 35 bar) and R744 (up to 200 bar)
Tested LIN 2.1 conformity
Automatic address assignment within LIN network

● Ultrasonic Level, Conductivity, Concentration, and Temperature Sensors

Continuously monitor fluid level for early detection of coolant leakage.

Level accuracy: ±2mm
Temperature accuracy: ±2.5°C
Output protocol offerings: Analog, PWM, SENT, CAN, LIN
Input voltage options: 5V / 12V / 48V

This will close in 0 seconds

● Temperature Sensors

Monitors the temperature at key locations of the fuel cell.

Monitor temperature in various areas of a fuel cell VTOL
Moisture-proof construction
Fast Response time
Wide temperature range

● Gas Leak Detection Sensors

Sensitivity to H₂ gases
Packaged Modules and Surface Mount versions
Fast response time: less than 1 second
IP6K7 rating
ASIL-A sensors, Thermal Conductivity sensor technology, 0-4% range

● Ultrasonic Fluid Level Switch

Monitor water level in the steam / water separation tank.

Simple analog (voltage) output
Extremely durable and accurate
Microprocessor controlled
All-plastic design (PPS) eliminates opportunity for metal ionization

● Pressure Sensors

Hydrogen tank pressure, coolant systems.

MEMS, piezoresistive, oil-filled
Extremely durable and accurate
Configurable with multiple outputs, connectors, ports, etc.
High accuracy and performance
Wide pressure range
Customization for specific applications
ASIL rating possible

● Pressure + Temperature

Hydrogen inlet, hydrogen outlet.

All plastic housings, bolt-on designs
Willing to customize for specific applications
High accuracy and performance
Wide pressure range
Custom options

● Gas Sensor

Hydrogen Sensor
Surface mount
Analog Output
Pre-calibrated
Automotive qualified
0-160000 ppm range

● Pressure Sensor

Cryogenic pressure sensors for hydrogen pump performance measurements.

Dynamic response with high-frequency response
High resolution, with microsecond rise time
Up to 10,000 psi (6.89 kPa) full-scale measurement range
Operating temperature down to -400°F (-240°C)

This will close in 0 seconds

● Diverse Selection of Chirp-Ready Ultrasonic Transducers Designed to Fit Various Vessel Types and Sizes

Thru-hull, in-hull, transom mount, pocket/cavity mount models.
Unparalleled depth and water temperature performance.
Frequency bands boasting over 70 kHz of bandwidth.
Ultimate target and range resolution, ensuring accurate depth tracking and comprehensive coverage under your boat.

● Precision Speed Sensors

Paddlewheel, ultrasonic, and electromagnetic models
Industry-leading paddlewheel start-up speed-through-water data below 0.3 knots and linear speed performance at 0.6 knots.
Accurate performance from start up through speeds of up to 45 knots.

● Top Tier Temperature Sensors

Integrated in almost all ultrasonic sensors for measuring water temperature or air temperature.

● Best-in-Industry Depth Sensors

High accuracy, providing precise depth readings even in challenging conditions.
Some come equipped with chirp technology, which enhances target and range resolution, providing Conventional (CW) or chirp technology, which enhances target and range resolution, providing detailed information about what's in the water column and bottom detail

● Award-Winning SmartBoat® Modules / Data Loggers

Universal NMEA 2000 device with browser based SMARTFLEX™ software that makes setup and customization easy.
All data accessible on vessel's MFD.

Only solution with:

NMEA 2000, nmea 0183, j1939, and j1587 support
Fully customizable sensor-based alertsappear on MFD or via cloud notification
Available with ethernet bridging today, supporting NMEA and onenet
Advanced logging features with option to "replay" saved logs

● WeatherStations® - Range of Ultrasonic Weather Instruments

Comprehensive weather data for marine mobile or stationary installation
Sensors for apparent & dynamic true wind speed & direction, barometric pressure, relative humidity, air, temperature, gps position, speed over ground, course over ground.
IPX7 rating, weather stations compatible with various communication protocols

This will close in 0 seconds

Cookie	Duration	Description
cookielawinfo-checbox-analytics	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Analytics".
cookielawinfo-checbox-functional	11 months	The cookie is set by GDPR cookie consent to record the user consent for the cookies in the category "Functional".
cookielawinfo-checbox-others	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Other.
cookielawinfo-checkbox-necessary	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookies is used to store the user consent for the cookies in the category "Necessary".
cookielawinfo-checkbox-performance	11 months	This cookie is set by GDPR Cookie Consent plugin. The cookie is used to store the user consent for the cookies in the category "Performance".
viewed_cookie_policy	11 months	The cookie is set by the GDPR Cookie Consent plugin and is used to store whether or not user has consented to the use of cookies. It does not store any personal data.

SSI Technologies, LLC

Magnetostrictive Linear Position Sensors

Temposonics

At Amphenol Sensors, we make Quality, Safety and Environmental Protection a top priority.

Level & Quality Sensors

SSI Technologies, LLC

Magnetostrictive Linear Position Sensors

Temposonics

At Amphenol Sensors, we make Quality, Safety and Environmental Protection a top priority.

Automotive - Fuel Handling System

Fuel Handling System Applications

● Temperature Sensors

● Pressure Sensors

● Position Sensors

Automotive - Cabin Comfort

Cabin Comfort Applications

● Temperature Sensors

● Pressure Sensors

● Gas Detection Sensors

● Dewpoint Sensors

● Dust Particulate Sensors

● Position Sensors

● Passive Entry and Passive Start Systems

● Acoustic Sensors

● Accelerometers

● Position Level Sensors

Automotive - Safety Systems

Safety Systems Applications

● Temperature Sensors

● Pressure Sensors

● CO2 Gas Sensors

● Position Sensors

● Level & Concentration Sensors

● Accelerometers

● Position Level Sensors

Automotive - HVAC

HVAC Applications

● Temperature Sensors

● Pressure Sensors

● Gas Detection Sensors

● Position Sensors

● Dust Particulate Sensors

● Combined Pressure & Temperature Sensors

Automotive - Internal Combustion Engine, Powertrain, and Electric Vehicle

Internal Combustion Engine, Powertrain, and Electric Vehicle Applications

● Temperature Sensors

● Pressure Sensors

● Level, Concentration & Conductivity Sensors

● Position Sensors

● Combined Pressure & Temperature Sensors

● Accelerometers

● Gas Detection Sensors

● Cell Connectivity System (CCS)

● Current Sensor

Automotive - Enabling ADAS / Autonomous Driving

Enabling ADAS / Autonomous Driving Applications

● Level, Concentration, & Alcohol Content Sensors

● Temperature Sensors

● Position / Speed Sensors

Automotive - After-Treatment

After-Treatment Applications

● Temperature Sensors

● Pressure Sensors

● DEF Level, Temperature & Concentration Sensors

Comm Aerospace - In-Cabin & Galley

In-Cabin & Galley Applications

● Temperature Sensors

● Gas Detection Sensors

● Position Sensors

● Position Sensors

Comm Aerospace - Airframe & Avionics

Airframe & Avionics Applications

● Temperature Sensors

● Temperature Sensors

● Pressure Sensors

● Ultra Low Pressure Sensors

● Tilt Sensors

Comm Aerospace - Fuel Systems

Fuel Systems Applications

● Pressure Sensors

● Gas Detection Sensors

● Position Sensors

Comm Aerospace - Engine

Engine Applications

● CO₂ Gas Sensors